| Capillary |
Variable in length and diameter depending on application / configuration. |
| Injection Modes |
- Hydrodynamic injection
- Electrokinetic injection - controlled voltage or current ramps
|
| Injection Pressure |
Variable from -180 to +250mbar with 1mbar resolution |
| Voltage range |
0 to +30kV or -30kV, 100 V increments |
| Current range |
0 to +200pA and -200pA, 1 uA increments, time-programmable |
| Repeatability |
Better than 0.1% RSD (voltage, current) |
| Programmable Ramp |
Voltage or current |
| Voltage Ramp |
- 0.1-50kV/s CE, resolution 100 V/s
- 0.01-50kV/s CEC, resolution 10 V/s
|
| Polarity Reversal |
Programmable during pre-run and run conditions |
| Autosampler/Fraction Collector |
- 30/48 position carrousel Vials randomly accessible from inlet and outlet end of the capillary
- All systems accept variable vial sizes for samples and buffers, including Eppendorf micro centrifuge tubes
|
| Temperature control |
- Sample/Buffer tray 4º to 40º C
- Capillary 5º C below ambient to 60º C
|
| Injection duration |
Max 650min, resolution 0,01 min |
| Repeatability of Injected volume |
< 1.0% RSD |
| Power requirements |
Mains voltage 115V or 230V Mains 50/60Hz 300VA |
| Dimensions |
Approximate Height 50cm (20 inch) x Depth 54cm (22 inch) |
